BeaverLake6 Report
BeaverLake6 Report

Special Reports: Foreign Trade Zones

Public Hearing Set for Coleman's Foreign Trade Zone Application. At the request of The Coleman Company, a public hearing will be held on its application for additional production authority for activity within Subzone 119I in Sauk Rapids, Minn., The Coleman facility employs 252 and is used for the production of personal flotation devices and cushions constructed with textile fabrics. Coleman requested FTZ production authority in a notification proceeding in 2014.

 

After an initial review, the requested production authority was approved subject to a restriction that precludes inverted tariff benefits on foreign textile fabrics and cases/bags of textile materials used in production of personal flotation devices and cushions for U.S. consumption. Three domestic trade associations had opposed the initial application -- National Council of Textile Organizations NCTO), American Fiber Manufacturers Association (AFMA) and United States Industrial Fabrics Institute (USIFI), a division of the Industrial Fabrics Association International.

 

BeaverLake6 Report reached out yesterday to NCTO for a comment and received the following response from Eliza Levy, Manager of Public Relations and Grassroots: "Because the Coleman FTZ comment period is still open, we are still in the process of vetting it with our members. Noting this, we firmly believe that FTZs should not be used to undermine the U.S. tariff code at the expense of U.S. producers. It is our view that trade negotiations are the appropriate venues for tariff reductions since the United States is in a position to obtain reciprocal benefits. Unilateral tariff removals such as those granted by FTZs are by definition non-reciprocal and discriminatory to American producers of competing products. As noted above, we are still studying this issue and will not have a final position until closer to the close of the public comment period."

 

Click here to read more about the Coleman FTZ application in David Trumbull's Textiles & Trade website. Posted November 6, 2015

Coming Events

  • September 23-26:  CAMX 2019. Anaheim, Calif., USA
  • September 24-25: RISE 2019, Raleigh, N.C., USA
  • September 25-26, 2019: AATCC Introduction to Textile Testing Workshop, Durham, N.C., USA
  • October 1-4:  IFAI Expo, Orlando, Fla., USA

Click here to view the complete technical textiles events calendar that includes show information links.

Media Partners

Do you wish to be added to our subscriber list? It's easy and it's free. Click here and write "Subscribe" in the message box.

Final Report Issued on 2018 China Industrial Textiles Industry

In 2018, China's industrial textile industry maintained a relatively rapid growth. The year, though, also found more complex challenges for the industry, including the tariff issues with the US. Thanks to BeaverLake6 Reports' exclusive arrangement with China Textile magazine, we are presenting the English-translated version of the final 2018 report written by the China Nonwovens & Industrial Textile Association (CNITA).  The report included information on fiber and material production, plus selected large end-product markets. Click here to read the report. Posted September 3, 2019

Do Profit and Convenience Muck Up the Moral Concern in Tariff Testimony by US Domestic Textile Industry?

NCTO Members Testifying at US International Trade Commission.  Surprisingly, there appears to be a little worry the announced new US tariffs on China (Section 301) may be reaching too far with its scope. The National Council of Textile Organizations (NCTO), which has been firmly behind most of the textile-tariffs against China over the last year, is expressing concern the new Tranche Four retaliatory tariffs may affect US imports on products needed by the US domestic textile industry.  

[Read the rest of my editorial that takes NCTO to task for its hypocritical "moral" argument supporting the proposed additional products but excluding its industry's suppliers by clicking here.]

 

Steve Warner

Publisher

Posted June 17, 2019

China's Industrial Textile Market Demands Still Remains Vigorous

Despite the increasingly complex industry demands, the Chinese technical textiles market was relatively stable. Nonwovens output increased over last year. Key specific markets such as tire cord also increased in 2018 over 2017. Overall operating income for industrial textiles used in China reached $34 billion. Click here to read the complete summary provided to BeaverLake6 Report by China Textile magazine through our exclusive relationship. Posted February 15, 2019

Does IDEA Show Need to be in Miami Beach?

INDA, the Association of the Nonwovens Fabrics Industry, has issued its final report on IDEA19.  The event held March 25-27, 2019 in Miami Beach, Fla., USA, attracted 6,500+ participants and 509 exhibiting companies from 75 countries.  Show floor space was a record 168,600 square feet, a 9% increase over the previous show. 

 

Surprisingly, the people and exhibitor participation figures are not record numbers. The IDEA16 show in Boston, Mass., USA, attracted 7000+ and 555 exhibitors. 

 

So, why was participation down this year from IDEA16?  I think an explanation for the decline is the South Florida location of IDEA19.  Click here to read more.

President Li Lingshen, President, China Nonwovens & Industrial Texiles Association

President Li Lingshen

BeaverLake6 Report is pleased to provide an exclusive interview with Li Lingshen, Ph.D., Vice President of the China National Textile and Apparel Council, and President of the China Nonwovens & Industrial Textiles Association, the overseeing organization for the technical textiles industry in China. Click here to read the interview.

Final Analysis of IFAI Expo 2018 and CAMX18

IFAI President S. Schiffman

IFAI Expo 2018 was the first show under IFAI's new CEO/President Steve Schiffman. In a quick conversation on the first day, Mr. Schiffman thought event attendance was on target with the expectation of a 500 increase over the 4500 total participants (counting both exhibitors and visitors) they had in 2017 in New Orleans. Similarly, a conversation with one of the managers of ACMA, a partner in CAMX, said their pre-registration had already topped the 6500 they had last year in Orlando. (Keep in mind, though, the 2017 CAMX show had to be rescheduled from September to December because of Hurricane Irma.) Click here to read more about the shows. 

NCTO Neglects Automotive Textiles as Organizations Testify          on Proposed USMCA Impact

Positive Reviews but Still Uncertainty. On November 16, 2018, two of the US textile industry associations testified before the US International Trade Commission (ITC) in a special hearing to determine the economic impact of the proposed United States-Mexico-Canada Agreement (USMCA).  The leaders of the American Apparel & Footwear Association (AAFA) and the National Council of Textile Organizations (NCTO) provided statements on how they feel the new agreement will affect their member companies. 

 

The two organizations clearly have different biases; however, in looking over the AAFA and NCTO statements, it appears to me that while the organizations both clearly said they were not offering an endorsement yet of the agreement, they gave general overall approval for USMCA, acknowledging the 1992 North American Free Trade Agreement (NAFTA) needed updating. Both organizations are taking a wait-and-see attitude to more fully look at how the agreement impacts the complex supply chain of textiles and apparel. Click here to read more.

NAFTA Replacement Agreement Negotiated. On October 1, President Donald Trump announced the US, Mexico and Canada had reached an agreement whichreplaces the North American Free Trade Agreement (NAFTA) that went into effect in 1994. The new United States-Mexico-Canada Agreement (USMCA) contains provisions and language that has an impact on the technical textiles industry; the most important are 1) a special section covering textiles and apparel and 2) rules of origin that will require 75% of automotive content (under NAFTA 62.5%) be made in North America. Mexico and Canada are the two largest importers of US made technical textiles and the automotive industry is the largest intended end market of these technical textiles. Click here to go to the United States Trade Representative's website and read the "Textiles and Apparel Goods" chapter. Posted October 3, 2018

State of the Chinese Technical Textiles Markets in 2017

Are you looking for a quick understanding of the China technical textiles industry? Through our special relationship with China Nonwovens & Industrial Textiles Association (CNITA) and their China Textile publication, BeaverLake6 Report is pleased to post the English-translation of the recently issued "Status Quo of China's Nonwovens and Industrial Textiles Industry, 2017." The report covers the different levels of the industry, geographic export demographics, and forecast the needs in the major end market applications. Click here to read the report in our China Textile website section. 

“BeaverLake6 Report is one of the ‘go-to’ websites that I use. New contributors and  innovative products are regularly featured, which to me, is the lifeblood of the industry.”

 

Ron Gottlieb  

  Director

  Ricky Richards (Sales) Pty Ltd.

Come back often during the week. We update BeaverLake6 Report almost every day with the latest industry information.

Beaverlake6 Group, LLC

Secretary Gary Locke, US Dept. of Commerce, and Steve Warner US Dept. of Commerce Secretary Gary Locke and Steve Warner

Success in our industry is all about knowledge, integrity and developing relationships. BeaverLake6 Group, LLC, publisher of BeaverLake6 Report, is a management consulting firm focused on helping businesses understand the complex global technical textiles industry.

 

Please click here to view testimonials about Steve Warner, President/CEO of BeaverLake6 Group, LLC.

Connect with Steve Warner, publisher of BeaverLake6 Report, at LinkedIn.

Connect with BeaverLake6 Report publisher Steve Warner via LinkedIn
Print Print | Sitemap Recommend this page Recommend this page
© BeaverLake6 Group LLC